資源描述：
《JB-T 8522-1997 稀油潤滑裝置 型式、基本參數與尺寸》由會員上傳分享，免費在線閱讀，更多相關內容在行業資料-天天文庫。
1、J21JB/T8522－1997稀油潤滑裝置型式、基本參數與尺寸1997-03-04發布1997-10-01實施中華人民共和國機械工業部發布JB/T8522－1997目次前言1范圍··········································································································································································
2、··········································12引用標準·········································································································································································································13裝置的基本參數··
3、························································································································································································14裝置的系統、元件與主要部件·····························································
4、·····························································································25裝置的控制要求······························································································································································
5、····························46裝置的型式、尺寸與標記·····································································································································································5IJB/T8522－1997前言本標準根據國內新研制的稀油潤滑元器件及原行業內有關稀油潤滑裝置技術要求而制
6、訂。本標準由西安重型機械研究所提出并歸口。本標準起草單位：西安重型機械研究所。本標準主要起草人：楊仁霖、倪熙安、賴永智。II中華人民共和國機械行業標準JB/T8522－1997稀油潤滑裝置型式、基本參數與尺寸1范圍本標準規定了稀油潤滑裝置的型式、基本參數與尺寸。本標準適用于冶煉、軋制、礦山、電力、石化、建材等機械設備的稀油循環潤滑系統的稀油潤滑裝置（以下簡稱裝置）。2引用標準下列標準所包含的條文，通過在本標準中引用而構成為本標準的條文。本標準出版時，所示版本均為有效。所有標準都會被修訂，使用本標準的各方應探討使用下
7、列標準最新版本的可能性。GB9119.7—88PN1.0MPa（10bar）凸面板式平焊鋼制管法蘭JB3711.2—84集中潤滑系統圖形符號JB3711.3—84集中潤滑系統技術量和單位JB/T4121—93潤滑元件及裝置型號編制方法3裝置的基本參數裝置的基本參數應符合表1、表2的規定。表1項目單位參數值備注裝置公稱壓力MPa0.52–5–5裝置介質粘度m/s2.2×10~46×10過濾精度mm0.08~0.13進水溫度℃≤30冷進水壓力MPa0.4卻器進油溫度℃≤50油溫降℃≥8電加熱——用于Q≤800L/min
8、裝置加熱蒸蒸氣溫度℃≥133方氣蒸氣壓力MPa0.3式加熱公稱流量——用于Q≥1000L/min裝置裝置油介質工作溫度℃40±5機械工業部1997-03-04批準1997-10-01實施1JB/T8522－1997表2公稱油箱電動機過濾換熱冷卻水冷卻水電加熱壓力罐蒸氣蒸氣管出油口回油口重量流量容積能力面積管通徑耗量器功率容量耗量通徑通徑通徑3233kgL/m
