h型雙極式pwm直流調速系統設計

《h型雙極式pwm直流調速系統設計》由會員上傳分享，免費在線閱讀，更多相關內容在教育資源-天天文庫。

1、控制系統課程設計設計題目：H型雙極式PWM直流調速系統設計學生姓名：王峰學號：200515221108專業班級：05自動化1班學部：信息科學與技術部指導教師：梁秀滿2008年11月28日....河北理工大學本科生課程設計成績總評表學部：信息科學與技術部班級：05自動化1班學生姓名王峰設計總成績設計題目H型雙極式PWM直流調速系統設計說明書評定成績答辯成績答辯時需要設計人回答的問題注：設計總成績=說明書評定成績（60%）＋答辯成績（40%）....設計任務書(一)性能指標要求：穩態指標：系統無靜差動態指標：；空載起動到額定轉速時。(

2、二)給定電機及系統參數：PN=220W,UN=48V,IN=3.7A,，nN=200r/min，Ra=6.5Ω電樞回路總電阻R=8Ω電樞回路總電感L=120mH電機飛輪慣量GD2=1.29Nm2(三)設計步驟及說明書要求：1畫出系統結構圖，并簡要說明工作原理。2根據給定電機參數，設計整流變壓器，并計算變壓器容量及副邊電壓值;選擇整流二極管及開關管的參數，并確定過流、過壓保護元件參數。3分析PWM變換器，脈寬調制器（UPW）及邏輯延時（DLD）工作原理。4設計ACR、ASR并滿足給定性能指標要求。5完成說明書，對構成系統的各環節分析

3、時，應先畫出本環節原理圖，對照分析。6打印說明書（A4），打印電氣原理圖（A4）。....目錄一引言···············································1二系統構成和原理···································1三PWM主電路設計····································3四電流調節器和轉速調節器的設計····················44.1電流調節器ACR的設計······························

4、···44.2轉速調節器ASR設計····································44.2.1電流環等效閉環傳遞函數····························74.2.2轉速調節器結構的選擇······························84.2.3時間常數的確定····································84.2.4轉速調節器參數的選擇······························84.2.5校驗近似條件·················

5、·····················84.2.6校核轉速超調量····································84.2.7轉速調節器的實現··································9五基于SG3525為核心構成的控制電路··················95.1SG3525芯片的內部結構及工作原理························9....5.2邏輯延時環節···········································10六驅動電路設計

6、········································11七電流反饋和轉速反饋電路設計························127.1電流反饋電路設計·······································127.2轉速反饋電路設計········································13八結束語·················································13九參考文獻·····················

7、··························15十總電路圖……………………………………………………161引言....直流電動機由于有著廣泛的起制動性能，宜于在廣泛范圍內平滑調速，且直流拖動系統在理論上和實踐上都比較成熟，因而目前應用廣泛。直流電機在一定范圍內無極平滑調速系統來說，以調節電樞電壓的方式最好。直流PWM調速系統作為一種新技術，發展迅速，應用日益廣泛，特別在中、小容量的系統中，已取代V-M系統成為主要的直流調速方式。脈寬調速實質上是調壓調速方式中的一種，它采用全控型電力電子器件組成的直流脈沖調制型的調速系統已發展

8、成熟，用途越來越廣，與傳統的V-M系統相比，在很多方面有很大的優越性。雙極式控制的橋式可逆PWM變換器有下列優點：（1）電流一定連續；（2）可使電機在四象限運行；（3）電機停止時有微振電流，能消除靜摩擦死區；（4）低速平穩性好，系統的調速范圍可達1