資源描述：
《GBT16921-2005 金屬覆蓋層 覆蓋層厚度測量X射線光譜法.pdf》由會員上傳分享，免費在線閱讀，更多相關內容在行業資料-天天文庫。
1、ICS25.220.20A29(G8中華人民共和國國家標準GB/T16921-2005/ISO3497:2000代替GB/T16921-1997金屬覆蓋層覆蓋層厚度測量X射線光譜方法Metalliccoatings-Measurementofcoatingthickness-X-rayspectrometricmethods(ISO3497:2000,IDT)2005-10-12發布2006-04-01實施中華人民共和國國家質量監督檢驗檢疫總局發布中國國家標準化管理委員會GB/T16921--2005/1S034
2、97:2000目次前言···············??‘’‘’‘1范圍··??””’二”””2術語和定義············，···········，，，·，····。。。，··································，·····························一13原理···························，·········，，··。。··································，······················
3、·······。，，，·24儀器，，，，，，····“····，，，，，，················】···············，··】】】·········，···，，·，··1··1·····4??55影響測量結果的因素·····，·····························，····································....................86儀器的校準，··。?！ぁぁ??！ぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁ?/p>
4、··，，·····························、·。·········，··············，，，二107規程··················，，，，··，，，。?！ぁぁぁぁ?。·············································‘······························??128測量不確定度·，，，·，··?！?。·?！ぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁ?/p>
5、·············，·，，，，。。?！ぁぁぁぁぁぁぁぁ??139測試報告···，，，··········‘······························，·············，··············，，，··，··，·····。·············??13附錄A(資料性附錄)常見覆蓋層測量的典型測量范圍，················?！ぁ！?，，··，·，···················??14參考文獻·········“·····················
6、····························，，·，··········4，·，···，·，·················??15標準分享網www.bzfxw.com免費下載GB/T16921-2005/1SO3497:2000hit言本標準等同采用ISO3497:2000(E)(金屬覆蓋層覆蓋層厚度測量X射線光譜方法)}(英文版)。本標準按(;B/T1.1的編輯要求，根據ISO3497重新起草。本標準對應ISO3497作了如下修改:—取消了ISO3497的前言內容，重新起草r本標準前言;增加了“
7、目次內容”;用“本標準’，代替“本國際標準”。本標準代替GB/T16921-1997《金屬覆蓋層覆蓋層厚度測量X射線光譜方法》?本標準與GB/T16921-1997相比主要變化如下:—在范圍中增加了警告;—在術語和定義中增加了基體材料、基體金屬和基體的定義，且將歸一化強度(1997年版的2.本版的2.4)的數學符號定義為二.(1997年版為In)，相應的數學關系式也隨之改變;—在3.3.3能量色散中，將波長和能量的關系式進行了修正;—在原理中，將其內容進行了重新排列，增加了3.5.3比率方法和3.7數學反卷積的描
8、述;—對5.1.2隨機誤差的標準偏差、以及5.6覆蓋層密度的公式進行了修正;—對5.16試樣表面的傾斜度的影響，做了更精確的修正;一在儀器的校準中增加了6.1.5計算機模擬主要參數的無標樣技術的描述;本標準的附錄A為資料性附錄本標準由中國機械工業聯合會提出。本標準由全國金屬與非金屬覆蓋層標準化技術委員會歸口。本標準起草單位:機械工業表面覆蓋層產品質量監督檢測中心本標準起草
