資源描述：
《J BT5000.13-1998-重型機械通用技術條件包裝.pdf》由會員上傳分享，免費在線閱讀，更多相關內容在行業資料-天天文庫。
1、ICS55.020J08Jjc?中華人民共和國機械行業標準JB/T5000.13一1998重型機械通用技術條件包裝TheheavymechanicalgeneraltechniquesandstandardsPacking1998-09-30發布1998-12-01實施國家機械工業局發布JB/T5000.13-1998目次前言1范圍................................................................................···········”············??，.12引用標準···
2、······················“·············································，···························??13包裝型式與技術要求··························································································??14框架木箱·............................................................................
3、.............................·一35包裝標志·······················································?！ぁぁぁぁぁぁ??！ぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぃぁぁぁぁぁぁぁぁぁぁぁ??36隨機文件·.............................................................................................................47鐵路運輸對包裝的要求··············
4、··································································....·.??4附錄A(標準的附錄)限界圖····················，··················?！ぁぁぁぁ?···，····························??5附錄B(提示的附錄)包裝型式············································································..·.??7附錄C(提示的附錄)產品的緊固方法·
5、··················，···········.··························..??11JB/T5000.13-1998前言本標準的附錄A是標準的附錄，附錄B和附錄C是提示的附錄。本標準由機械工業部冶金設備標準化技術委員會提出并歸口。本標準起草單位:沈陽重型機械集團有限責任公司、沈陽礦山機器廠、西安重型機械研究所。本標準主要起草人:魏國君。中華人民共和國機械行業標準重型機械通用技術條件JB/T5000.13-1998包裝、TheheavymechanicalgeneraltechniquesandstandardsPacki
6、ng1范圍本標準規定了重型機械產品的包裝型式、包裝要求和包裝設計等。本標準適用于重型機械產品的包裝。凡圖樣及技術文件中無特殊要求時，均應符合本標準的規定。2引用標準下列標準所包含的條文，通過在本標準中引用而構成為本標準的條文。本標準出版時，所示版本均為有效。所有標準都會被修訂，使用本標準的各方應探討使用下列標準最新版本的可能性。GB19。一9。危險貨物包裝標志GB191一9。包裝儲運圖示標志GB1413一85集裝箱外部尺寸和額定重量GB1834一8。通用集裝箱最小內部尺寸GB4879一85防銹包裝GB6388一86運輸包裝收發貨標志GB7284一87框架太箱包裝
7、型式與技術要求3.1箱裝3.1.1普通箱3.1.2普通滑木箱3.1.3框架滑木箱3.1.3.1封閉箱3.1.3.2花格箱3.2局部包裝3.3敞裝3.4捆裝3.5裸裝3.6常見包裝型式的結構示例及適用范圍見附錄B(提示的附錄)3.7包裝箱頂部型式一般為平頂，如不經海運且無堆碼要求時也可采用非平頂3.8基本要求3.8.1產品包裝應根據產品的特點及儲運條件采用不同的包裝型式和防護方法。3.8.2產品包裝應符合科學、經濟、牢固、美觀、適銷的要求。在正常儲運條件下，應保證產品自制造廠包裝之日起12個月內不至因包裝不善而產生銹蝕、長霉、降低精度、殘損或散失等現象。特殊情況按
8、供國家機械工業局1998
