資源描述：
《畢業設計（論文）-凸臺類零件加工設計》由會員上傳分享，免費在線閱讀，更多相關內容在學術論文-天天文庫。
1、數控技術專業畢業設計班級：姓名：指導老師：題目：凸臺類零件加工日期：年月日畢業作業（論文）任務書姓名學號畢業屆別屆專業畢業作業（論文）題目凸臺類零件加工指導教師學歷在讀研究生職稱講師畢業作業提要：根據畢業設計要求繪制二維圖。對零件進行工藝分析。根據零件外形及尺寸要求確定加工設備。用自動編程軟件仿真加工。根據零件的尺寸要求進行刀具的選擇以及刀具參數的設置。由計算機自動生成程序。對程序進行后置處理（進行必要的修改）指導教師簽字：年月日教研室意見：教研室主任簽字：年月日題目發出日期2007.9.28設計（論文）起止時間9.28-10.30畢業作業(論文)評閱書姓名學號專業畢業作業(論文)
2、題目凸臺類零件加工指導教師評語：得分指導教師簽字：年月日教研室意見：教研室主任簽字：年月日目錄一、加工零件和工藝分析··········································1(一)、工件簡介····················································2(二)、加工原點設置···············································2(三)、加工工步分析···············································21、外形粗加工·········
3、·········································22、定位孔加工··················································33、凹槽粗加工··················································34、外形精加工··················································35、凸臺內外壁精加工··········································36、中心通孔加工·················
4、······························37、鉆孔··························································4(四)、工件的裝夾與定位·········································4(五)、數控加工工藝卡及刀具卡片································4二、用MASTERCAM進行仿真加工···································5(一)、外形銑削進行外形粗······························
5、··········5(二)、用中心鉆加工定位孔········································9(三)、挖槽進行凹槽粗加工·······································10(四)、外形銑削進行外形精加工··································11(五)、外形銑削凸臺內外壁加工··································12(六)、全圓銑削進行中心孔加工··································13(七)、鉆孔進行孔加工···········
6、··································15三、程序后處理······················································16(一)、實體模擬切削···············································16(二)、后處理·······················································17(三)、修改后的NC程序···········································17四、小結···········
7、···················································23五、參考文獻·························································24凸臺零件加工圖1-1加工圖如1-1所示零件，零件毛坯尺寸160x160x25，材料為塑料批量生產，試分析其數控加工中心加工工藝過程。第1頁一、工藝分析（一）、工件簡介如圖1-2所示為凸臺類零件，其凸臺的部位有多段圓弧和直線組成,凸臺高度
